Single Row Ball Bearings
The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.
- SKF 6015 2ZJEM Single Row Ball Bearings
- 12mm
- 11 mm
- SKF 6014 2ZJEM Single Row Ball Bearings
- Standard
- Steel
- SKF 6013 NRJEM Single Row Ball Bearings
- Height Selection
- L-Shaped
- SKF 6009 JEM Single Row Ball Bearings
- Flange Type
- Deep Groove Ball Bea
- SKF 6006 JEM Single Row Ball Bearings
- 1.5 mm
- 72 mm
- SKF 6013 2ZJEM Single Row Ball Bearings
- 65.1 mm
- 29.1 mm
- SKF 6008 NRJEM Single Row Ball Bearings
- ES206G2T20
- 35.7 mm
- SKF 6001 JEM Single Row Ball Bearings
- Bearings with Housin
- 8 Days
- SKF 6008 JEM Single Row Ball Bearings
- 6
- Stainless Steel