Single Row Ball Bearings
The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.
- SKF 209 NR/C3 Single Row Ball Bearings
- 57 mm
- 99 mm
- SKF 6007-2RS1NR Single Row Ball Bearings
- Available
- 6
- SKF 62202-2RS1/W64F Single Row Ball Bearings
- Standard Grease
- Bearing Steel
- SKF 6220-2RS1/W64 Single Row Ball Bearings
- Flanged Pilot Type
- Yes (with retaining
- SKF 6314-Z/C3GJN Single Row Ball Bearings
- Compact Type
- Double
- SKF 6016 NR/C3 Single Row Ball Bearings
- 25.7 kN
- 59.9 mm
- SKF 316 M Single Row Ball Bearings
- 2.05 kN
- No
- SKF 61807/C4 Single Row Ball Bearings
- 55 kN
- 4 mm
- SKF 208 S Single Row Ball Bearings
- -25 °C
- 110 °C
- SKF 61864 MA/C3 Single Row Ball Bearings
- 6
- Cylindrical Bore Set
- SKF 16020/C3 Single Row Ball Bearings
- 19 mm
- 146 mm