| 71817ACD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | PG:1/8 NPT; Cap bolt:2 x 5/8-11 UNC; P120°:31.6 kN; da:73.025 mm; PosiTrac Plus contact element:2 x B10724-53; Cap bolt recommended tightening torque:149.1 N·m; N1:22.225 mm; H2:31.75 mm; ba:31.75 mm; Stabilizing ring:2 x SR-1517; Mass pillow block:17.9 kg; P150°:28.5 kN; R2:22.225 mm; P180°:34.7 kN; Appropriate attachment bolt size G:0.75 in; J max.:279.4 mm; RG:3/8 NPT; Ca:42.799 mm; |
| 7215CDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,15 Degree Contact Angle | Basic Static Radial Load Rating Co:53000 N; d:80.000 mm; Oil Speed Rating n2:5300 rpm; Sealed Speed Rating n3:3000 rpm; Basic Dynamic Radial Load Rating C:72800 N; B:26.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Grease Speed Rating n1:4500 rpm; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Fillet Radius ra:2.00 mm; Accessories:Snap-Ring; |
| 71816ACD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | B:36.00 mm; Oil Speed Rating n2:7200 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:6000 rpm; Basic Dynamic Radial Load Rating C:55300 N; D:90.0000 mm; Basic Static Radial Load Rating Co:56000 N; d:55.000 mm; |
| 71814ACD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | Housing material:Cast iron; J7:24.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Db2:84 mm; N:11.5 mm; J:82.5 mm; T:42.2 mm; Housing:FY 506 M/VZ033; Limiting speed:1200 r/min; Recommended diameter for attachment bolts, mm G:10 mm; Db1:76 mm; Recommended tightening torque for grub screw:4 N·m; Hexagonal key size for grub screw N:3.175 mm; Basic dynamic load rating C:19.5 kN; |
| 7014ACE/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Taconite seal (db shaft position):TER 144; P120°:116 kN; Eye bolt:3/8-16 UNC; S:4.763 mm; PG:1/4 NPT; Initial grease fill:481.95 g; h:51.594 mm; Max. speed for Taconite seal:490 r/min; P60°:301 kN; H1:152.4 mm; H:298.45 mm; R1:87.313 mm; Cap bolt, SAE grade:8; Housing:SSAFS 228; Ca:77.8 mm; Cap bolt:7/8-9 UNC; R2:38.1 mm; L:511.175 mm; da:140 mm; Stabilizing ring:SR-28-0; |
| 71815CD/P4DGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | D:47.0000 mm; B:24.00 mm; Oil Speed Rating n2:13000 rpm; Basic Static Radial Load Rating Co:14000 N; d:25.000 mm; Basic Dynamic Radial Load Rating C:174100 N; Fillet Radius ra:0.64 mm; Fillet Radius rb:0.30 mm; Grease Speed Rating n1:9600 rpm; |
| 71914CD/P4ADGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | B:58.00 mm; Fillet Radius rb:1.00 mm; D:280.0000 mm; Basic Static Radial Load Rating Co:305000 N; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:276000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2600 rpm; d:130.000 mm; |
| 71914ACEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | J min.:209.55 mm; Mass bearing unit:8.39 kg; H:144.463 mm; A:73.025 mm; Attachment bolt diameter G:15.875 mm; B:65.484 mm; da:61.913 mm; H1:69.85 mm; Limiting speed:3800 r/min; L:266.7 mm; H2:41.275 mm; s:29.766 mm; Basic dynamic load rating C:193 kN; S:0.794 mm; J max.:222.25 mm; |
| 7018ACD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Calculation factor (back-to-back, face-to-face) X2:0.67; d2:100.8 mm; Basic dynamic load rating C:44.2 kN; Db max.:121 mm; Calculation factor (single, tandem) Y0:0.38; d1:100.8 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic static load rating C0:48 kN; Da max.:119 mm; D1:114.2 mm; D:125 mm; Calculation factor f:1.23; rb max.:0.6 mm; da min.:96 mm; Calculation factor fHC:1; r3,4 min.:0.6 mm; |
| 7216ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | r1,2 min.:1 mm; Da:109 mm; Db:101 mm; Mass bearing:1.04 kg; ra max.:1 mm; F:100 mm; db:99.3 mm; Basic static load rating C0:190 kN; d:90 mm; Limiting speed:4800 r/min; Basic dynamic load rating C:67.1 kN; E:108 mm; Fatigue load limit Pu:23.6 kN; da:107.2 mm; D:120 mm; s max.:1 mm; Reference speed:4000 r/min; B:30 mm; |
| 71815ACDGB/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | da:40 mm; ba:29.369 mm; P120°:12.5 kN; Stabilizing ring:SR-10-8; N1:15.875 mm; P180°:13.8 kN; PG:1/8 NPT; R2:15.875 mm; Taconite seal (db shaft position):TER 24; Max. speed for Taconite seal:1575 r/min; P60°:32.5 kN; h:30.163 mm; H1:63.5 mm; dc:36.5 mm; End plug (suffix Y):EPR 3; Mass pillow block:7.01 kg; P90°:19.6 kN; Initial grease fill:31.185 g; J max.:177.8 mm; Da:90 mm; |
| S7014CEGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | B:40 mm; Mass inner ring:0.21 kg; d:50 mm; r, r1,2 min.:0.6 mm; F:58 mm; |
| 7018CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | r3,4 min.:0.6 mm; r1,2 min.:0.3 mm; Fatigue load limit Pu:4.3 kN; D:100 mm; Static axial stiffnes:940 N/µm; Angle between bolts and thread holes α/2:22.5 °; H:38 mm; Required attachment bolt size (DIN 912):M8; H1:30 mm; J:80 mm; Frictional moment:0.8 N·m; Mass bearing:1.72 kg; Angle between holes in outer ring (Pitch) α:45 °; Attainable speed:2600 r/min; Basic dynamic load rating C:64 kN; |
| S7013CE/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Basic Static Radial Load Rating Co:173000 N; Basic Dynamic Radial Load Rating C:168000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Sealed Speed Rating n3:1500 rpm; D:260.0000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:Two Seals & Snap-Rin; d:170.000 mm; B:42.00 mm; |
| 71814ACDGB/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | B:54.00 mm; Fillet Radius ra:3.00 mm; D:225.0000 mm; Basic Dynamic Radial Load Rating C:229000 N; Basic Static Radial Load Rating Co:220000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3500 rpm; Grease Speed Rating n1:2700 rpm; d:90.000 mm; |
| 7018ACEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; B:100 mm; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; Tolerance housing:H7; Mass bushing:2.12 kg; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; d:75 mm; D:100 mm; |
| No. | Brand | s | H | E | N | C | J | w | L |
| S7018CEGB/P4A | SKF | - | - | - | - | - | - | - | - |
| 71914CD/P4ADGB | SKF | - | - | - | - | - | - | - | - |
| S7018ACEGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 71918ACD/P4ADGB | SKF | - | - | - | - | - | - | - | - |
| 71817ACD/P4DGA | SKF | - | - | - | - | - | - | - | - |
| 71916CD/P4ATBTA | SKF | - | - | - | - | - | - | - | - |
| 71914CEGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 7019CDGB/P4A | SKF | - | 209.55 mm | - | - | - | - | - | - |
| 7017ACDGB/P4A | SKF | - | - | - | - | - | - | - | - |
| BTW90CTN9/SP | SKF | - | - | - | - | - | - | - | - |
| 7017CD/P4ADGA | SKF | - | 174.625 mm | - | - | - | - | - | - |
| 7215ACD/P4ADGA | SKF | - | - | - | - | - | - | - | - |
| 71917ACDGB/P4A | SKF | - | - | - | - | - | - | - | - |
| S7014CEGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 71915CD/P4ATBTA | SKF | - | - | - | - | - | - | - | - |
| 71919ACD/P4ATBTA | SKF | - | - | - | - | - | - | - | - |
| 71817CDGB/P4 | SKF | - | - | - | - | 13 mm | - | - | - |
| 7218ACD/P4ADGA | SKF | - | - | - | - | - | - | - | - |
| 7014ACEGB/P4A | SKF | - | - | - | - | - | - | 41 mm | - |
| 7015CDGB/P4A | SKF | - | - | - | - | - | - | - | - |
| 71916ACD/P4ADGB | SKF | - | - | - | - | - | - | - | - |
| 71915ACD/P4ATBTA | SKF | - | - | - | - | - | - | - | - |
| 7217CDGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 71915CDGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 7218ACDGB/P4A | SKF | 25.4 mm | 114.3 mm | - | - | - | - | - | 225.425 mm |
| 71819CDGA/P4 | SKF | - | - | - | - | - | - | - | - |
| 7214ACD/P4ADGA | SKF | - | - | - | - | - | - | 60 mm | - |
71816CDGB/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle Video
Super Precision Angular Contact Ball Bearing Ref. Nsk
Description: Super precision angular contact ball bearing supports higher radial loads than precision ball bearings. It also supports axial loads in both directions
super precision bearings for machine tool applications
NSKHPS High Precision Angular Contact Ball Bearings. Basic Super Precision Bearings manufactured to conform to ISO standards. › 70xx, 72xx, 79xx series
Super-precision angular contact ball bearings: High ... - SKF
SKF sealed super-precision angular contact ball bearings provide opti- mum performance in applications where there is a need for high reliability and super- ior accuracy. The bearings are filled with high-speed grease
Super-precision angular contact ball bearings: High ... - SKF
SKF high-capacity super-precision angular contact ball bearings. SKF bearings in the 72 .. D (E 200) series are characterized by: • high load carrying capacity
Super Precision Angular Contact Ball Bearings - Emerson
Browse Super Precision Angular Contact Ball Bearings in the Emerson Bearing catalog including 7900 Series Extra Light Duty Super Precision Angular Contact
RHP Super Precision Angular Contact Ball Bearings - A H R
RHP Super Precision Angular Contact Ball Bearings. 3. Introduction. 5. Materials and Limiting Temperatures. 5. Dimensions. 5. High Point of Radial Runout. 5