20 mm x 42 mm x 12 mm FAG 7004-B-TVP Angular Contact Ball Bearings

No.	Brand	s	d	b	J	H	G	T	F
7311-B-MP-UL	FAG	-	-	-	116.5 mm	-	-	-	-
3210-B-2RSR-TVH	FAG	-	80.000 mm	-	-	-	-	-	-
7313BEAT85SUN	NSK	-	50.000 mm	-	-	-	-	-	-
3809-B-2RZ-TVH	INA	-	50.000 mm	-	-	-	-	-	-
7315BW	NSK	-	-	-	-	-	-	-	-
7224BM	NSK	-	45.000 mm	-	-	-	-	-	-
7219BW	NSK	-	-	-	-	-	-	-	-
3002-B-2RS-TVH	FAG	-	-	-	-	-	-	-	-
7324BMG	NSK	-	100 mm	-	-	-	-	-	-
3207B-2RSRTNGC3	NSK	-	-	-	-	398.462 mm	-	-	-
7312BEAT85SUN	NSK	-	17.000 mm	-	-	-	-	-	-
7096-MP-UA	FAG	-	-	-	-	298.45 mm	-	-	-
7321BL1GC3	NTN	-	30 mm	-	-	-	M 30x1.5	-	-
3210BTNH	NSK	-	25.000 mm	-	-	-	-	-	-
3205B-2RSRTNGC3	NSK	-	90 mm	-	-	-	-	-	-
7218BW	NSK	-	-	3 mm	-	-	-	-	32 mm
71806-TN	FAG	-	105.000 mm	-	-	-	-	-	-
7332BM	NSK	-	750 mm	22.3 mm	-	-	-	-	866 mm
3806-B-2RZ-TVH	INA	-	-	-	-	-	-	-	-
7322BW	NSK	-	100.000 mm	-	-	-	-	-	-
71860-MPA	FAG	-	-	-	-	169.863 mm	-	-	-
3209-NPP-B-AH02	INA	-	10 mm	-	-	-	-	-	-
3801-B-2RS-TVH	INA	-	-	-	-	-	-	25.25 mm	-
7336BM	NSK	-	50.000 mm	-	-	-	-	-	-

3.937 Inch \| 100 Millimeter x 8.465 Inch \| 215 Millimeter x 1.85 Inch \| 47 Millimeter NSK 7320BM Angular Contact Ball Bearings	Oil Speed Rating n2:5300 rpm; Accessories:No Shield, no Seal; d:50.000 mm; D:110.0000 mm; Fillet Radius ra:2.00 mm; B:47.60 mm; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:95200 N; Grease Speed Rating n1:4000 rpm; Size (mm):3.937 Inch \| 100 Millimeter x 8.465 Inch \| 215 Millimeter x 1.85 Inch \| 47 Millimeter ;
1.181 Inch \| 30 Millimeter x 2.441 Inch \| 62 Millimeter x 0.937 Inch \| 23.8 Millimeter NSK 3206B-2ZRTNGC3 Angular Contact Ball Bearings	Oil Speed Rating n2:1300 rpm; Fillet Radius rb:1.50 mm; d:200.000 mm; Grease Speed Rating n1:880 rpm; Fillet Radius ra:4.00 mm; D:420.0000 mm; Basic Dynamic Radial Load Rating C:741000 N; B:160.00 mm; Basic Static Radial Load Rating Co:1320000 N; Size (mm):1.181 Inch \| 30 Millimeter x 2.441 Inch \| 62 Millimeter x 0.937 Inch \| 23.8 Millimeter ;
0.787 Inch \| 20 Millimeter x 1.26 Inch \| 32 Millimeter x 0.394 Inch \| 10 Millimeter INA 3804-B-2RZ-TVH Angular Contact Ball Bearings	D1 ≈:50.65 mm; db min.:40 mm; r3,4 min.:1.1 mm; ra max.:1 mm; r1,2 min.:1.1 mm; D:62 mm; Fatigue load limit Pu:6.95 kN; da max.:32.5 mm; F:34 mm; Angle ring:HJ 2305 EC; Size (mm):0.787 Inch \| 20 Millimeter x 1.26 Inch \| 32 Millimeter x 0.394 Inch \| 10 Millimeter ;
50 mm x 90 mm x 30,2 mm FAG 3210-B-2RSR-TVH Angular Contact Ball Bearings	d:80.000 mm; D:200.0000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Basic Static Radial Load Rating Co:176000 N; Basic Dynamic Radial Load Rating C:176000 N; B:48.00 mm; Size (mm):50 mm x 90 mm x 30,2 mm ;
1.378 Inch \| 35 Millimeter x 3.15 Inch \| 80 Millimeter x 0.827 Inch \| 21 Millimeter NSK 7307BEAT85SUN Angular Contact Ball Bearings	G:39.7 mm; Lock washer:W 08; Sleeve:S 8x1.1/4; Lock nut:N 08; B1:37.948 mm; B:11.379 mm; B4:12.598 mm; d3 max.:57.277 mm; Threads per inch:18; d:40 mm; Size (mm):1.378 Inch \| 35 Millimeter x 3.15 Inch \| 80 Millimeter x 0.827 Inch \| 21 Millimeter ;
7.874 Inch \| 200 Millimeter x 11.417 Inch \| 290 Millimeter x 0.945 Inch \| 24 Millimeter NTN QJ12966S04 Angular Contact Ball Bearings	Oil Speed Rating n2:2700 rpm; Basic Dynamic Radial Load Rating C:255000 N; Grease Speed Rating n1:2200 rpm; d:140.000 mm; Basic Static Radial Load Rating Co:345000 N; B:72.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; D:220.0000 mm; Size (mm):7.874 Inch \| 200 Millimeter x 11.417 Inch \| 290 Millimeter x 0.945 Inch \| 24 Millimeter ;
0.787 Inch \| 20 Millimeter x 2.047 Inch \| 52 Millimeter x 0.874 Inch \| 22.2 Millimeter NSK 3304 B-2RSRTNG Angular Contact Ball Bearings	H:292.1 mm; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 26x4.7/16; Housing:SSAFS 526; ba:57.944 mm; H2:60.325 mm; H1:152.4 mm; Stabilizing ring:SR-26-0; R2:36.513 mm; P60°:308 kN; Size (mm):0.787 Inch \| 20 Millimeter x 2.047 Inch \| 52 Millimeter x 0.874 Inch \| 22.2 Millimeter ;
2.756 Inch \| 70 Millimeter x 5.906 Inch \| 150 Millimeter x 1.378 Inch \| 35 Millimeter NSK 7314BEAT85SUN Angular Contact Ball Bearings	Basic Static Radial Load Rating Co:204000 N; Fillet Radius rb:1.00 mm; B:49.00 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3400 rpm; D:225.0000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:229000 N; d:105.000 mm; Size (mm):2.756 Inch \| 70 Millimeter x 5.906 Inch \| 150 Millimeter x 1.378 Inch \| 35 Millimeter ;
FAG 7220-B-MP-UA-K6 Angular Contact Ball Bearings	Basic Static Radial Load Rating Co:31000 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:55300 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:4900 rpm; B:25.00 mm; d:35.000 mm; D:100.0000 mm;
15 mm x 24 mm x 7 mm FAG 3802-B-2Z-TVH Angular Contact Ball Bearings	J max.:488.95 mm; Housing:SAW 232; N1:28.575 mm; Lock washer:W 32; P60°:226 kN; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P180°:94.3 kN; Cap bolt, SAE grade:5; dc:153.988 mm; Size (mm):15 mm x 24 mm x 7 mm ;
FAG 71860-MPA Angular Contact Ball Bearings	Cap bolt, SAE grade:5; H2:31.75 mm; Appropriate attachment bolt size G:0.75 in; R2:21.431 mm; Bearing:22216 EK; ba:34.131 mm; H:169.863 mm; h:31.75 mm; L:330.2 mm; da:69.85 mm;
FAG 7221-B-MP-S1-UA Angular Contact Ball Bearings	Sealed Speed Rating n3:10000 rpm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:6700 N; d:20.000 mm; Grease Speed Rating Open/Shielded n1:15000 rpm; Oil Speed Rating Open/Shielded n2:18000 rpm; B:20.64 mm; Accessories:Removable Metal Shie; Basic Dynamic Radial Load Rating C:13000 N;
FAG 7309-B-JP-UM Angular Contact Ball Bearings	d1 ≈:223 mm; a:58.002 mm; Da min.:273 mm; Cb min.:17 mm; db min.:169.5 mm; Basic dynamic load rating C:879 kN; Fatigue load limit Pu:104 kN; d:150 mm; Da max.:303.5 mm; da max.:189 mm;
40 x 3.543 Inch \| 90 Millimeter x 0.906 Inch \| 23 Millimeter NSK 7308BW Angular Contact Ball Bearings	d:850 mm; Pu:1915.050 kg; B1:375 mm; D:1280 mm; Static (Cor):31930 ; B:540 mm; Dynamic (Cr):12896 kN; Bearing designation:PLC 512-62 ; Weight:2350 ; Size (mm):40 x 3.543 Inch \| 90 Millimeter x 0.906 Inch \| 23 Millimeter ;

20 mm x 42 mm x 12 mm FAG 7004-B-TVP Angular Contact Ball Bearings Video

7004 B-2RS-TVP FAG Angular Contact Bearing 20x42x12

7004 B-2RS-TVP FAG Angular Contact Bearing 20x42x12. Technical breakdown of the suffix: B-2RS-TVP - 40° contact angle, rubber seals on both sides, glass fibre reinforced polyamide cage

FAG Bearings SINGLE ROW ANGULAR CONTACT BALL

FAG Bearings SINGLE ROW ANGULAR CONTACT BALL BEARINGS (7004-B-2RS-TVP): Amazon.com: Industrial & Scientific

Angular contact ball bearings - 7004-B-XL-2RS-TVP - medias

Angular contact ball bearings 7004-B-XL-2RS-TVP, contact angle. Radial load Axial load in one direction Sealed on both sides Lifetime lubrication, freedom

Deep groove ball bearing 7004-B-TVP-FAG - 20x42x12 mm

Deep groove ball bearing 7004-B-TVP-FAG IN STOCK, dim : Ø int. 20 x Ø ext. 42 x th. 12 mm. SAME DAY SHIPPING. The specialist at your service for over 10

7004-B-2RS-TVP FAG X Life Sealed Angular Contact Bearing

7004-B-2RS-TVP FAG X Life Sealed Angular Contact Bearing 20x42x12mm - FAG Single row angular contact ball bearing with two rubber seals 20mm inside x

Deep groove ball bearing 7004-B-2RS-TVP-FAG - 20x42x12

Deep groove ball bearing 7004-B-2RS-TVP-FAG IN STOCK, dim : Ø int. 20 x Ø ext. 42 x th. 12 mm. SAME DAY SHIPPING. The specialist at your service for over

Bearing 7004-B-TVP (FAG) | Size and Specification | Bearings

Angular contact ball bearings 7004-B-TVP. Bearing number : 7004-B-TVP. Size (mm) : 20x42x12. Brand : FAG. Bore Diameter (mm) : 20. Outer Diameter (mm) :

7004-B-TVP - medias

... FAG products further - for your benefit. Unfortunately you have found a link on the Internet that refers to a obsolete product designation. Product 7004-B-TVP

FAG (Schaeffler) - 7004-B-2RS-TVP - Motion Industries

FAG (Schaeffler) 7004-B-2RS-TVP. Angular Contact Bearing - 20 mm Bore, 42 mm OD, 12 mm Width, Double Seal, 40 ° Contact Angle, C0

7004-B-TVP FAG • ABF Store

7004-B-TVP FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8

Brand Name	FAG
Model Number	7004-B-TVP
Min.Order Quantity	1 pcs
Price	Negotiable

3.937 Inch \| 100 Millimeter x 8.465 Inch \| 215 Millimeter x 1.85 Inch \| 47 Millimeter NSK 7320BM Angular Contact Ball Bearings	Oil Speed Rating n2:5300 rpm; Accessories:No Shield, no Seal; d:50.000 mm; D:110.0000 mm; Fillet Radius ra:2.00 mm; B:47.60 mm; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:95200 N; Grease Speed Rating n1:4000 rpm; Size (mm):3.937 Inch \| 100 Millimeter x 8.465 Inch \| 215 Millimeter x 1.85 Inch \| 47 Millimeter ;
1.181 Inch \| 30 Millimeter x 2.441 Inch \| 62 Millimeter x 0.937 Inch \| 23.8 Millimeter NSK 3206B-2ZRTNGC3 Angular Contact Ball Bearings	Oil Speed Rating n2:1300 rpm; Fillet Radius rb:1.50 mm; d:200.000 mm; Grease Speed Rating n1:880 rpm; Fillet Radius ra:4.00 mm; D:420.0000 mm; Basic Dynamic Radial Load Rating C:741000 N; B:160.00 mm; Basic Static Radial Load Rating Co:1320000 N; Size (mm):1.181 Inch \| 30 Millimeter x 2.441 Inch \| 62 Millimeter x 0.937 Inch \| 23.8 Millimeter ;
0.787 Inch \| 20 Millimeter x 1.26 Inch \| 32 Millimeter x 0.394 Inch \| 10 Millimeter INA 3804-B-2RZ-TVH Angular Contact Ball Bearings	D1 ≈:50.65 mm; db min.:40 mm; r3,4 min.:1.1 mm; ra max.:1 mm; r1,2 min.:1.1 mm; D:62 mm; Fatigue load limit Pu:6.95 kN; da max.:32.5 mm; F:34 mm; Angle ring:HJ 2305 EC; Size (mm):0.787 Inch \| 20 Millimeter x 1.26 Inch \| 32 Millimeter x 0.394 Inch \| 10 Millimeter ;
50 mm x 90 mm x 30,2 mm FAG 3210-B-2RSR-TVH Angular Contact Ball Bearings	d:80.000 mm; D:200.0000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Basic Static Radial Load Rating Co:176000 N; Basic Dynamic Radial Load Rating C:176000 N; B:48.00 mm; Size (mm):50 mm x 90 mm x 30,2 mm ;
1.378 Inch \| 35 Millimeter x 3.15 Inch \| 80 Millimeter x 0.827 Inch \| 21 Millimeter NSK 7307BEAT85SUN Angular Contact Ball Bearings	G:39.7 mm; Lock washer:W 08; Sleeve:S 8x1.1/4; Lock nut:N 08; B1:37.948 mm; B:11.379 mm; B4:12.598 mm; d3 max.:57.277 mm; Threads per inch:18; d:40 mm; Size (mm):1.378 Inch \| 35 Millimeter x 3.15 Inch \| 80 Millimeter x 0.827 Inch \| 21 Millimeter ;
7.874 Inch \| 200 Millimeter x 11.417 Inch \| 290 Millimeter x 0.945 Inch \| 24 Millimeter NTN QJ12966S04 Angular Contact Ball Bearings	Oil Speed Rating n2:2700 rpm; Basic Dynamic Radial Load Rating C:255000 N; Grease Speed Rating n1:2200 rpm; d:140.000 mm; Basic Static Radial Load Rating Co:345000 N; B:72.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; D:220.0000 mm; Size (mm):7.874 Inch \| 200 Millimeter x 11.417 Inch \| 290 Millimeter x 0.945 Inch \| 24 Millimeter ;
0.787 Inch \| 20 Millimeter x 2.047 Inch \| 52 Millimeter x 0.874 Inch \| 22.2 Millimeter NSK 3304 B-2RSRTNG Angular Contact Ball Bearings	H:292.1 mm; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 26x4.7/16; Housing:SSAFS 526; ba:57.944 mm; H2:60.325 mm; H1:152.4 mm; Stabilizing ring:SR-26-0; R2:36.513 mm; P60°:308 kN; Size (mm):0.787 Inch \| 20 Millimeter x 2.047 Inch \| 52 Millimeter x 0.874 Inch \| 22.2 Millimeter ;
2.756 Inch \| 70 Millimeter x 5.906 Inch \| 150 Millimeter x 1.378 Inch \| 35 Millimeter NSK 7314BEAT85SUN Angular Contact Ball Bearings	Basic Static Radial Load Rating Co:204000 N; Fillet Radius rb:1.00 mm; B:49.00 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3400 rpm; D:225.0000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:229000 N; d:105.000 mm; Size (mm):2.756 Inch \| 70 Millimeter x 5.906 Inch \| 150 Millimeter x 1.378 Inch \| 35 Millimeter ;
FAG 7220-B-MP-UA-K6 Angular Contact Ball Bearings	Basic Static Radial Load Rating Co:31000 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:55300 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:4900 rpm; B:25.00 mm; d:35.000 mm; D:100.0000 mm;
15 mm x 24 mm x 7 mm FAG 3802-B-2Z-TVH Angular Contact Ball Bearings	J max.:488.95 mm; Housing:SAW 232; N1:28.575 mm; Lock washer:W 32; P60°:226 kN; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P180°:94.3 kN; Cap bolt, SAE grade:5; dc:153.988 mm; Size (mm):15 mm x 24 mm x 7 mm ;
FAG 71860-MPA Angular Contact Ball Bearings	Cap bolt, SAE grade:5; H2:31.75 mm; Appropriate attachment bolt size G:0.75 in; R2:21.431 mm; Bearing:22216 EK; ba:34.131 mm; H:169.863 mm; h:31.75 mm; L:330.2 mm; da:69.85 mm;
FAG 7221-B-MP-S1-UA Angular Contact Ball Bearings	Sealed Speed Rating n3:10000 rpm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:6700 N; d:20.000 mm; Grease Speed Rating Open/Shielded n1:15000 rpm; Oil Speed Rating Open/Shielded n2:18000 rpm; B:20.64 mm; Accessories:Removable Metal Shie; Basic Dynamic Radial Load Rating C:13000 N;
FAG 7309-B-JP-UM Angular Contact Ball Bearings	d1 ≈:223 mm; a:58.002 mm; Da min.:273 mm; Cb min.:17 mm; db min.:169.5 mm; Basic dynamic load rating C:879 kN; Fatigue load limit Pu:104 kN; d:150 mm; Da max.:303.5 mm; da max.:189 mm;
40 x 3.543 Inch \| 90 Millimeter x 0.906 Inch \| 23 Millimeter NSK 7308BW Angular Contact Ball Bearings	d:850 mm; Pu:1915.050 kg; B1:375 mm; D:1280 mm; Static (Cor):31930 ; B:540 mm; Dynamic (Cr):12896 kN; Bearing designation:PLC 512-62 ; Weight:2350 ; Size (mm):40 x 3.543 Inch \| 90 Millimeter x 0.906 Inch \| 23 Millimeter ;

20 mm x 42 mm x 12 mm FAG 7004-B-TVP Angular Contact Ball Bearings

Product Features