Single Row Ball Bearings
The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.
- SKF 6309 ZJEM Single Row Ball Bearings
- 11 mm
- 12.7 mm
- SKF 6302 2ZJEM Single Row Ball Bearings
- Flanged Pilot Type
- No
- SKF 6312 ZJEM Single Row Ball Bearings
- M10x1
- 85.8 mm
- SKF 6313 ZJEM Single Row Ball Bearings
- 29.4 mm
- 3.7 Nm
- SKF 6212-2RS1/W64F Single Row Ball Bearings
- 57 mm
- 28 mm
- SKF 6307 ZJEM Single Row Ball Bearings
- 1045 Carbon Steel
- Flanged Pilot Type
- SKF 6207 ZJEM Single Row Ball Bearings
- Metric System
- Steel
- SKF 6301 2ZJEM Single Row Ball Bearings
- 0.6 mm
- 8.85 Hz
- SKF 6300 JEM Single Row Ball Bearings
- Deep Groove Ball Bea
- Bearings with Housin