Single Row Ball Bearings
The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.
- SKF 6207 NRJEM Single Row Ball Bearings
- B00308
- 0.472 Inch | 12 Mill
- SKF 6203 NRJEM Single Row Ball Bearings
- 15 mm
- 30 mm
- SKF 6203 ZJEM Single Row Ball Bearings
- 18.5 mm
- 38.1 mm
- SKF 6222 ZJEM Single Row Ball Bearings
- 16 mm
- 17 mm
- SKF 6311 ZJEM Single Row Ball Bearings
- 39.7 mm
- 32.55 mm
- SKF 629 JEM Single Row Ball Bearings
- 20 ~ 30
- 10
- SKF 6213 NRJEM Single Row Ball Bearings
- 1.24 kg
- 158 mm
- SKF 6310-ZNBR/C3 Single Row Ball Bearings
- Pillow Type
- 6
- SKF 6306 NRJEM Single Row Ball Bearings
- [Steel] Steel
- 40
- SKF 6208 ZJEM Single Row Ball Bearings
- T, h Configurable
- 6
- SKF 6213 JEM Single Row Ball Bearings
- Deep Groove Ball Bea
- Compact Type